TECHNICAL INFORMATION

For technical information or to request a quote for either a new tool, tool maintenance or to run Rim or TPO part, please contact Mr. Larry Weiss, Operations Manager at: 800.656.4276.

Below we have provided you with some preliminary technical information about our Rim procedures and processes.

BAYER BAYFLEX

Polyurethane Elastomeric Rim

	110-50	110-80
General Mold Shrinkage	1.3 Unfilled	1.3 Unfilled
Mechanical Tensile Strength, Ultimate Flexural Modulus at 73 Degrees	3,500 52,000	3,500 80,000

Minimum Size:
A=42"
B=15"
C=54"

Maximum Size:
A=86"
B=24" - 27"
C=56"

TOOL SPECIFICATIONS

Cincinnati Milacron Presses

NOTES:

No hydraulic near mix heads
No water lines near mix heads
The gate is best placed into top of part
Shot size maxiumum 19 lbs +/-
Battenfeld Presses 1-2-3:
A = 30" to 50"
B = 20" to 33"
C = 96"
Shot Size: 5lbs - 16lbs +/-